http://www.ducacraft.com/making%201.htm
KANEDA special - MAKING
It is production process of KANEDA special.
As for based car 250 cc scooters fusion of HONDA.
You removed everything of the wrapping part, wrapping full custom did with FRP.
Based car fusion
When wrapping everything is removed. Furthermore you remove also the light/write from here, relocate also ????? to the seat rear section. It is start of prototype production of the FRP wrapping.
Urethane foam prototype production
Prototype it keeps producing with urethane foam modelling.
Urethane foam prototype
The entire forum generally it is the place where you complete.
From now on setting the surface with the resin, it advances to small making being packed and finished job.
Prototype production
The upper cowl the front does already to the FRP product. It is making being packed stage of the front fender and the nosewheel cover.
Prototype production
The central part and the meter panel part, it is finished stage of the rear upper cowl.
Prototype production
It is at the point where the completion of the big part is completed almost.
When such as 90% completion as an entire prototype production.
Type it does to take each part from now on, into the stage of FRP formation enters.
Prototype
It is the place where it can form the principal part FRP, can install.
It collects final part constitution from now on, passes the supplement production of the auxiliary part and travelling test, is finished and the transferring/changing section does in stage.
Seat part prototype production
It is the place where it starts shaving seat prototype with the urethane foam.
Because the based part the original it is different considerably, it is the part whose it is difficult to reappear.
To 6 division constitution, it forms separately.
Seat prototype production
It is the place where it sets with the resin.
After the finished job, it enters into concave production.
Immediately before the test travelling front view
While it is not yet paint of the gel coat finish, it enters into the stage of test travelling.
Front face
The headlight of blue LED 6 ream was installed.
Also the Wien car similarly is the orange of LED.
Meter panel, mirror
The speedometer processes genuine digital meter, the button whose under the left is red is the starter.
Installing also the voltmeter of analog, furthermore it adds the indicators.
Finally, it means to line up on the based panel of the silver.
Afterwards, in center of the steering wheel it is the schedule which it adds produces the meter box.
You install also the acrylic mirror.
You think that from visibility trick it becomes realistically the dummy.
Rearview
It is illumination state of the Wien car the rear.
Real feeling came out considerably.
Also piping of ????? which is temporary was settled, became the feeling which tightens.
Rearview 2
It is the temporary tail lamp for test travelling and installing state of number.
As for being the cat's eye tail with charm.
In the exposure part of ????? and the frame it is the schedule which afterwards installs the cover.
The muffler to leap at the beginning like neo-hukuoka, the upper part in the rear upper cowl paralleling, you installed you applied
Being, it does, but the silencer - there was also a problem such as fixing, in this demonstration car made fixed at normal position.
The wheel cover of the right rear cut lower half. The design cover of the cutting part is done from this.
Immediately before the test travelling cockpit
You install also the part around and the like the steering wheel, enter into test travelling after the adjusting.
Around the steering wheel
Installing the radial master cylinder in the front brake.
Damping force it raised.
Meter panel
The indicators are not yet installing, but the speedometer and the voltmeter it is the place where it wired.
Genuine of the fusion says, digital meter matches to the Kanada motorcycle well.
Seat prototype
The prototype of the seat was installed.
In regard to circumstances of process of trial manufacture, is installing only the central part of the bearing surface and the back rest, but.
The feeling which sits down is very.
Test travelling under way cockpit
Position 50mm was raised for improving the handling operativity.
It modified also screen form attendant upon that.
Meter panel
The indicators were added.
Headlight
Directing to the public road test, you replaced the headlight to 35 W halogen.
Test travelling under way
In order to look at image the screen part was painted temporarily in the silver.
Directing to the public road travelling test, also adjustment of the section is the under way.
Rearview
Tail lamp modification to those of simple form.
Being finally more undersized, it is the schedule which it makes those of simple form.
Image also the license plate being that the one which at all is not is better, it does, but....
Meter panel
Also trial manufacture of the meter panel advanced considerably.
Installing the based panel of the aluminum, atmosphere came out.
When arrival sitting down, the satisfaction is different.
Around the steering wheel
For rear visibility guaranty, bar ended mirror additional installing.
Beginning release ! ! Riding in a car state picture
Riding in a car state picture 2
Test travelling under way
Public road travelling is included, test travelling is repeated.
Because 250cc says with the vibration of the one cylinder engine, each part trembles,
Vibration prevention processing of the respective part is being advanced.
?????
It is problem of cooling efficiency of ????? which is the important part, but the position where it relocated calls directly above of the engine
Partly due to a thing, in present condition water temperature is maintained by raising a little, improvement has become necessary.
Counter-measure such as addition of the air intake and addition of the cooling fan it is in the midst of examining.
Air intake
As a counter-measure of cooling efficiency improvement of ?????, in the side part of the back rest
The air intake was increased.
Meter panel
The meter part and the indicators and the like wiring of each part are advanced.
Part finish
We are advancing the finish and foundation paint of the FRP part.
It applied the final coating the lead-lead promptly, got near to demonstration car completion more and more.
????? lower part cover
Also it could form the ????? lower part cover.
The exposure part of the frame which has become matter of concern there is also also the fact that it comes being the cover,
It is the feeling where rearview is settled.
Cooling fan addition
For cooling efficiency rise of ?????, it made twin fan specification.
In regard to circumstances of process, the operational test is after the painting the body, but
You think the insecurity of cooling efficiency with this that it could cancel.
Italian lead paint
Paint of the finish of each part it is the under way.
It becomes demonstration car completion promptly.
